12u/126HP Cherry Eurorack Case Sliding Nuts With TipTop Audio Zeus Studio Power

£1,125.00 (£937.50 ex VAT)

Category:

NOTE: This is available now. The cherry colour is closer colour to the second and third image (the photo was taken in synthetic lighting which distorted the colour in the photo).

12U/126HP eurorack case in solid cherry with sliding nuts and fitted TipTop Audio Zeus Studio power with 4 busboards fitted.

The 12U Eurorack Case is the latest addition to the SynthRacks Peter range and has adopted a slightly gentler curve on the face, whilst retaining the distinct familiar look.

The case is largely made from solid hardwood and finished with Danish Oil for a great finish and to protect the wood.

At the back of the case, there is a continuous air vent and a utility cut out (60mm x 90mm) in the rear panel which is blanked off with 2 removable and interchangeable panels, that simply screw into the rear panel covering the cutout. The main purpose of the cutout is to allow for easy access to install an alternative power supply. We can supply a variety of panels including a plate housing an unwired IEC C14 male connector (a kettle lead). This will occupy half of the utility cut out. The second half can remain as a vented blank panel or we can supply a plate with a variety of handy pre-punched panels.

POWER

The TipTop Audio system provides quality Eurorack power for your system. If you purchase your case with the TipTop Audio Zeus Studio Bus system, you will be provided.

Zeus Studio Bus board – one for each row of modules.
Zeuss Access Switch.
Cinicon-TTA Power Supply.
There is lots of information and additional details in the TipTop Audio Zeus Studio Bus manual. The manual is well worth reading to understand the system, although a great deal of the information is about installing the power in your case. Of course, if you order a SynthRacks case with a power system, we will install it for you. If you are starting to build up your Eurorack system, we can supply a single Zeus Studio Bus board, to which you can add additional boards as your system builds up (please get in touch to enquire about pricing). The case will be pre-drilled to accept new boards – if you get these from SynthRacks, we will supply all the necessary hardware (the standoffs/spacers) and hook up wires.

The Zeus Studio Bus board offers a total of 16 module connectors: 14 of them are 16-pin headers for connecting Eurorack modules and two of the connectors are for Analogue Systems modules. The additional 5V voltage needed by some modules is being generated internally by the Zeus Studio Bus. Three LEDs show the active voltages 12V, -12V and 5V. The maximal current per bus board is 1250mA at 12V, 800mA at -12V and 300mA at 5V. Tiptop Audio recommend the use of a powerful external power supply with 4.6A for providing up to three Zeus Studio Busses with power. The Cinicon power supply will be supplied with a 13amp IEE lead (kettle style lead). If you are buying outside of the UK you will need to supply your own lead to connect the power to the mains.

Note: Cinicon switching power supply works with 110v to 230v.

DELIVERY

Available Now – 3 – 4 days delivery

MODULE FIXINGS

126HP cases – 60 M3 sliding square nuts per 3U frame.

Reviews

There are no reviews yet.

Be the first to review “12u/126HP Cherry Eurorack Case Sliding Nuts With TipTop Audio Zeus Studio Power”

Your email address will not be published. Required fields are marked *