Doepfer PSU3 With Bus Boards – 12U Bundle

What is in the bundle:
• 2 x Doepfer PSU3
• 4 x Doepfer A-100 Bus Boards
• Electric hook up wires
• Fused Mains switch

The Doepfer PSU3 is an assembled and tested power with a wide range of input 100-240V. Input power 75 watts (full load). Up to four bus boards can be connected to the A-100 PSU3.

Dimensions:  200 mm (length) x 80 mm (width) x 40 mm (height).

This can be retrofitted to upgrade older Doepfer cases and is a direct replacement for the older A-100NT12 or A-100 PSU2. The PSU3 has it own spacers attached and comes with mounting screws.

Power Supply:
4000mA +12v
2400mA -12v
8000mA +5V

The 4 x Doepfer A-100 Bus Boards each connects up to 14 eurorack modules via 16-pin headers.  The red LEDs on the board indicate whether the correct voltage is available for the module showing the +12v, -12v and +5V.  Each A-100 Bus Board includes four cables for connection to the PSU3 power supply. The cable lengths are approx 300mm in length (30cm) with flat connectors at each end suitable for easy connection to the Doepfer PSU3. (The A-100 bus board is also suitable for use with many other power supplies).

Dimensions of the A-100 bus board are:
390mm in length, 43mm wide, and 15mm high, without spacers.

Please contact us for further details if you would like this Power system built into a case we are making for you.

Please be aware that the power supply carries mains voltage (115 or 230v AC) and mains connections /installation should be carried out by a competent qualified person.