Everything that you need for powering up of your case is included in one complete 70W SET with two bus boards. SeventyPWR SET is a great choice for 6U eurorack studio and traveling cases with lot of digital modules and modules with high startup current requires. Whilst you should always check your power draw requirements we are confident it will be good for 130hp rows and less.
– includes KonstantLabs small 70W power board (zero HP) (+12V / 2.5A, -12V / 2.5A, +5V / 2A), power inlet panel with switch, two Filtered bus boards #1 – each of them has 18 output headers (6 filtered and 12 direct) or Filtered bus boards #2 – each of them has 19 output headers (6 filtered and 13 direct) which ensures that you will be able to power up quite a lot of modules, 90W Meanwell power brick, wires, spacers, and screws. If you prefer the side mounted filtered busboards please let us know and we will do our best to accommodate.
SeventyPWR is a small but powerful and precise PSU solution. It is sturdy and stable PSU with immunity against high startup currents which require some modules. You can mount it into your synth case without sacrificing any HP. SeventyPWR is safely supplied from an external DC power brick (18-24V).
Filtered Bus Board is a low profile bus board with extra filtered output headers. Bus board contains 18 or 19 output headers (depends on what kind of bus board you chose). 12 (13) direct headers and 6 filtered headers with LC filters. Filtered headers are specially dedicated to feed analog modules that are sensitive/susceptible to power quality. Filters reject noise caused by PSU and digital modules by 70%. Each power rail is protected against over voltage so your modules and system are safe under all conditions. 90% of the bus board area has only 11mm with inserted connectors. This feature makes Filtered bus board an ideal power distribution solution for skiff cases where depth is a concern.
Output power: 70W
Outputs: +12 V / 2500 mA
-12 V / 2500 mA
+5 V / 2000 A
Input: 19V DC (18V – 24V DC)
Dimensions: 131mm x 58mm x 20mm
Protections: Input reverse polarity protection
Output short circuit – automatic recovery
Output over current – automatic recovery
All output protections are independent for each rail
Filters: Dual Input common mode LC filter
Independent LC filter for each converter
Output decoupling capacitors
Stability: +- 1% in range of 0 – 100% load
Input / Output: WAGO 256 series – shock proof terminals
Accessories: Aluminum panel with 5,5 x 2.5 DC input (center positive), power switch and two 25cm wires
Screws 2,9 x 13mm 6pcs
Spacers 3mm height 4pcs